Abdeckung Heckhalter RAL 7035 für Heckdicke 20/25mm Grösse 90 x 75mmAdditional information:Gray stern cover RAL 7035 suitable for sterns mm thick. 20/25. Dims. mm. 90x75.

Aufhängung für Lagerung und Transport von Tendern am Heck. Komplett mit 2 Ringen und 2 Haken in InoxAdditional information:Set for sthourge and carry the tenderon the platform or on the stern of boat. Provided with no. 2 stainless steel rings to glue on the tender and no. 2 Stainless steel hooks to fasten on the bridge or on the stern. ONLY FOR TENDER IN NEOPRENE

Aufhängung für Lagerung und Transport von Tendern am Heck. Komplett mit 2 Ringen und 2 Haken in InoxAdditional information:Set for sthourge and carry the tenderon the platform or on the stern of boat. Provided with no. 2 stainless steel rings to glue on the tender and no. 2 Stainless steel hooks to fasten on the bridge or on the stern. ONLY FOR TENDER IN PVC

Battery cable and terminals with 8 mm cable lug terminals and 50 AMP manual reset circuit breaker. It is often used to add a second or third battery in a 24 V or 36 V installation. Lenght m 1,2

Handle that can be used as a base for a good rope or rope handle.To make a hole with a diameter suitable for the top used, a top of the top is blocked in the appropriate housing of the handle. mm. 240X105X45H

Black neoprene rowlock socket, dim.mm.150x95

Black PVC rowlock socket, dim.mm.150x95

Black PVC rowlock socket, dim.mm.227x122

Bow Stepin PVC für Schlauchdurchmesser von 35 bis 65 cm Dank steifem Innenkern Montage von Klampen, Handgriffen, Lichtern, Badeleitern etc. möglich. Grösse 460 x 340mmAdditional information:Bow Stepmade in grey RAL 7035 PVC suitable for tube from 35 to 65 cm of diameter. Thanks to its internal rigidity allows the installation of lights, cleats, handles, bow spoolers, hinges for ladders and other accessories. Dimensions mm. 460 x 340

Clamseal für Reparaturen ober und unterhalb der WasserlinieAdditional information:the system is composed of two plates able to repair quickly and easily without glue or tape small tears or cracks in the inflatable boats,above or below the waterline, life rafts and any inflatable products.- Open and insert the base plate into the division- Pull the plates together, through the rift, using the lanyard- With the two plates pulled together, just tighten the nut by hand by onewaterproof and waterproof- Can be reused.

Griff Evolution für Boote in PVC und Gummi. Grösse 265 x 95x 60mmAdditional information:Grey PVC handle (RAL 7035).Dim. mm. 265 x 95x 60H

Replacement with anodised aluminium rod, plastic blades. with hole in the sleeve for scaler with pin. Sold in pairs.

Replacement with anodised aluminium rod, plastic blades. with hole in the sleeve for scaling with the pin. Sold in pairs.

Replacement remote control for use with Pinpoint GPS-enabled engines. Only compatible with Xi Series motors.

Bow Stepmade in grey RAL 7035 neoprene suitable for tube from 35 to 65 cm of diameter. Thanks to its internal rigidity allows the installation of lights, cleats, handles, bow spoolers, hinges for ladders and other accessories. Dimensions mm. 460 x 340

Handle that can be used as a base for a good rope or rope handle.To make a hole with a diameter suitable for the top used, a top of the top is blocked in the appropriate housing of the handle. mm. 240X105X45H

Grey neoprene rowlock socket ( RAL 7035 ), dim.mm.150x95

Grey PVC rowlock socket ( RAL 7035 ), dim.mm.150x95

Grey PVC rowlock socket ( RAL 7035 ), dim.mm.227x122

Haken für Ruder mm 115 x 95 x 55hAdditional information:Grey hook for oars ( ral 7035 ), dim.mm. 115 x 95 x 55h

Black hook for oars, dim.mm. 115 x 95 x 55h

Rohrhalterung in PVC für Schlauchboote für Rohr Ø 22mm Grösse 100 x 120 x 60mmAdditional information:PVC support for tube (RAL 7035) allows you to apply handles and guard rail tube Ø 22mm to inflatable of all sizes. Dim. mm. 100 x 120 x 60H