PVC wing profile, lightweight type for boats with flat rebate assembly, needs T22 semi-rigid duralene base support, easily takes any bend. Conf. mt. 25, Weight gr./mt. 1600. T-base bracket art. 6566066, End cap art. 6566018B/6566018, Joint cover 6566017B/6566017.

PVC wing profile, lightweight type for boats with flat rebate assembly, requires T.22 base support in semi-rigid duralene, easily takes any bend. Conf. mt. 25, Weight gr./mt. 1600.

  Patented PVC wing profile for boxed couplings. The special feature of this profile is that it can be cold applied in just a few quick steps. 1/1A - Application of the rail, screwing/riveting 2/2A - Application of the profile by turning it backwards as far as possible with a sharp bend, (Radial 80 must be heated to 40° C), the two sealing inserts will open, push firmly towards the rigid rail, moving forward quickly 3 - Product applied Mod. Radial 52, A mm. 26, B mm. 52, C mm. 29, Conf. mt. 24.  

Patented PVC wing profile for boxed couplings. The special feature of this profile is that it can be cold applied in just a few quick steps. 1/1A - Application of the rail, screwing/riveting 2/2A - Application of the profile by turning it backwards as far as possible with a sharp bend, (Radial 80 must be heated to 40° C), the two sealing inserts will open, push firmly towards the rigid rail, moving forward quickly 3 - Product applied Mod. Radial 52, A mm. 26, B mm. 52, C mm. 29, Conf. mt. 24.

Patented PVC wing profile for boxed couplings. The special feature of this profile is that it can be cold applied in just a few quick steps. 1/1A - Application of the rail, screwing/riveting 2/2A - Application of the profile by turning it backwards as far as possible with a sharp bend, (Radial 80 must be heated to 40° C), the two sealing inserts will open, push firmly towards the rigid rail, moving forward quickly 3 - Product applied Mod. Radial 52, A mm. 26, B mm. 52, C mm. 29, Conf. mt. 24.

Patented PVC wing profile for boxed couplings. The special feature of this profile is that it can be cold applied in just a few quick steps. 1/1A - Application of the rail, screwing/riveting 2/2A - Application of the profile by turning it backwards as far as possible with a sharp bend, (Radial 80 must be heated to 40° C), the two sealing inserts will open, push firmly towards the rigid rail, moving forward quickly 3 - Product applied Mod. Radial 65, A mm. 26, B mm. 65, C mm. 29, Conf. mt. 24.

Patented PVC wing profile for boxed couplings. The special feature of this profile is that it can be cold applied in just a few quick steps. 1/1A - Application of the rail, screwing/riveting 2/2A - Application of the profile by turning it backwards as far as possible with a sharp bend, (Radial 80 must be heated to 40° C), the two sealing inserts will open, push firmly towards the rigid rail, moving forward quickly 3 - Product applied Mod. Radial 65, A mm. 26, B mm. 65, C mm. 29, Conf. mt. 24.

Patented PVC wing profile for boxed couplings. The special feature of this profile is that it can be cold applied in just a few quick steps. 1/1A - Application of the rail, screwing/riveting 2/2A - Application of the profile by turning it backwards as far as possible with a sharp bend, (Radial 80 must be heated to 40° C), the two sealing inserts will open, push firmly towards the rigid rail, moving forward quickly 3 - Product applied Mod. Radial 65, A mm. 26, B mm. 65, C mm. 29, Conf. mt. 24.

Patented PVC wing profile for boxed couplings. The special feature of this profile is that it can be applied cold in just a few quick steps. 1/1A - Application of the rail, screwing/riveting 2/2A - Application of the profile by turning it backwards as far as possible with a sharp bend, (Radial 80 must be heated to 40° C), the two sealing inserts will open, push firmly towards the rigid rail, moving forward quickly 3 - Product applied Mod. Radial 80, A mm. 32, B mm. 80, C mm. 33, Conf. mt. 16.

Patented PVC wing profile for boxed couplings. The special feature of this profile is that it can be applied cold in just a few quick steps. 1/1A - Application of the rail, screwing/riveting 2/2A - Application of the profile by turning it backwards as far as possible with a sharp bend, (Radial 80 must be heated to 40° C), the two sealing inserts will open, push firmly towards the rigid rail, moving forward quickly 3 - Product applied Mod. Radial 80, A mm. 32, B mm. 80, C mm. 33, Conf. mt. 24.

Patented PVC wing profile for boxed couplings. The special feature of this profile is that it can be applied cold in just a few quick steps. 1/1A - Application of the rail, screwing/riveting 2/2A - Application of the profile by turning it backwards as far as possible with a sharp bend, (Radial 80 must be heated to 40° C), the two sealing inserts will open, push firmly towards the rigid rail, moving forward quickly 3 - Product applied Mod. Radial 80, A mm. 32, B mm. 80, C mm. 33, Conf. mt. 16.

Patented PVC wing profile for boxed couplings. The special feature of this profile is that it can be applied cold in just a few quick steps. 1/1A - Application of the rail, screwing/riveting 2/2A - Application of the profile by turning it backwards as far as possible with a sharp bend, (Radial 80 must be heated to 40° C), the two sealing inserts will open, push firmly towards the rigid rail, moving forward quickly 3 - Product applied Mod. Radial 80, A mm. 32, B mm. 80, C mm. 33, Conf. mt. 24.

Patented PVC wing profile for boxed couplings. The special feature of this profile is that it can be applied cold in just a few quick steps. 1/1A - Application of the rail, screwing/riveting 2/2A - Application of the profile by turning it backwards as far as possible with a sharp bend, (Radial 80 must be heated to 40° C), the two sealing inserts will open, push firmly towards the rigid rail, moving forward quickly 3 - Product applied Mod. Radial 80, A mm. 32, B mm. 80, C mm. 33, Conf. mt. 16.

Patented PVC wing profile for boxed couplings. The special feature of this profile is that it can be applied cold in just a few quick steps. 1/1A - Application of the rail, screwing/riveting 2/2A - Application of the profile by turning it backwards as far as possible with a sharp bend, (Radial 80 must be heated to 40° C), the two sealing inserts will open, push firmly towards the rigid rail, moving forward quickly 3 - Product applied Mod. Radial 80, A mm. 32, B mm. 80, C mm. 33, Conf. mt. 24.

White pvc joint cap for C55 and Radial 52-65.