Adadapter für FusspumpenAdditional information:Fittings for inflators by hand or pedal

Inflator with pressure selection capability through a special pressure gauge. Capacity 160 lt / minAutomatic stop at the selected pressure up to 1200 mbar (18 psi). Power supply 12V-20A. Complete with fittings for dinghies and kites and shoulder bag. Dimensions 205x105x130 mm

Adaptors for electric inflators and pumps with pressure gauge (Bravo 7M - 8M)

Dual-flow hand inflator, ABS body and sand protection. Maximum pressure bar 1 (14,5 psi). Complete with fittings.

Electric inflator and deflator 230V. Maximum pressure mbar 200 (2.9 psi), power 600w.

High flow and high pressure inflator / deflator. Flow rate lt / min 450, adjustable pressure up to mbar 800 (4.4 psi). Cable for charge at 12V. Works only with internal battery. Automatic stop at the chosen pressure. Suitable for traditional dinghies. Equipped with a 7 Ah rechargeable battery that allows a range of about 15 minutes at full load. Dim. Mm. 180x200x300. Weight kg. 4.8

Pressure selection facilitated with this specialmanometer. Flow l/min: 420/160. Automaticstop when selected pressure is reached, max0,95 Bar (13,8 psi). Power supply 12V, consumptionmax. 20A. Equipped with connectorsfor dinghies and kites with shoulder bag.Dims. mm. 295x105x160h..

Handpumpe Doppelfluss, Gehäuse in ABS und Aluminium. Volumen 2 x 1500cc. Max. Druck 1900mbar (27,5 psi). Komplett mit Filter. Grösse 140 x 300 x 570mmAdditional information:Double flow hand inflator, body in ABS and aluminum. Volume 2x1500cc. Maximum pressure mbar 1900 (27.5 psi). Complete with fittings, protective filter, ergonomic handle and wide base for better stability. Dim. Mm. 140x300x570h

Kunststoffpumpe mit Teilen in Inox, Universalanschlüsse. 6,5 liter, Grösse 290 x 210 x 80mmAdditional information:Very durable plastic pump, reinforced fabricband, metal parts in stainless steel, universalfittings. Lt 5. Max pressure 400mbar. Dims.mm.290 x 220 x 80h.

Consists of a main motor and a booster motor, wich increases the capacity nad pressure. The two motors can run simultaneously to obtain maximum capacity and pressure. Press the orange button for the main motor and the red one to swich on the booster. Both motors are protected by thermal-amperic fuses. Cord 3mt. Dim. mm. 320x170x260H.Weight kg. 4,1. Main moto Air flow l/min 1800, press. mbar 230. Main+boostr motors Air flow l/min 2500, press. mbar 500

New 12V-45 / 60A inflator-deflator. Able to inflate maxi dinghies in a few minutes. Flow rate l / min 1000, max pressure mbar 250 (dinghy of 7 meters in 7 minutes). Equipped with 2 powerful motors mounted on an aluminum plate to dissipate heat. Power cable and tube each of 3. mt. Dim. Mm. 310x190x180 h. Weight kg. 3.5

Bravo 6 Doppelhub-Luftpumpe mit Monometer bis 1,0 bar, inkl. 2 Luftdüsen und Adapter. 2 x 2500ccm Kann auch mit einfachem Luftstrom für höchsten Druck verwendet werden. Grösse 210 x 120 x 470mmAdditional information:Double flow hand inflator, body in ABS, volume 2x2500 cc. pressure mbar 600 (8.7 psi). By removing the cap the pump becomes a simple flow, inflating at maximum pressure with limited effort. Dim. Mm. 210x120x470h

Professional double-chamber inflator (5 liters - 800 mbar) with a device that allows optimal use of both tubular and high pressure bottom inflation. Equipped with a visual pressure indicator to warn of over inflation.- Made of durable glass fiber reinforced with nylon- Unalterable by the sun or the marine environment- Kg 1,9- 4 non-slip feet for greater stability- Standard crush resistant hoseDim. Mm. 325x250x80h

High flow and high pressure inflator. Flow rate lt / min 450, adjustable pressure up to mbar 300 (4.4 psi). Power supply 12V-13A. Automatic stop at the chosen pressure. Suitable for traditional dinghies. Dim. Mm. 180x200x240. Weight kg 1.9.

High speed Inflator-deflator, 450 lt./min. Pressure canbe settled up to 800 mbar (11,7 psi). Suitablefor inflatable bottom RIBS. It automaticallystops at the settled pressure. Power 12 V.Consumption 10/20 Amp. Dims. mm. 155 x230 x 115 h. Weight kg. 1,5.

Druckmesser bis 1000mbar. Kann zwischen Luftpumpe und Ventil oder direkt am Ventil montiert werdenAdditional information:Pressure gaugeto check the pressure up to 1 bar during inflation.

Overpressure valve to be inserted between the sleeve and the air source (electric inflator, foot or compressor). When the optimal pressure is reached, the valve intervenes, causing excess air to escape. Replaces the pressure gauge. If a sleeve is too swollen, inserting the overpressure valve into that of the sleeve, the pressure will be restored to the optimal inflation pressure.

Pressure gauge up to mbar 1000. It fits directly in the valve via universal adapter.

Length mt 1,5, diameter mm 25

Length mt 1,5, diameter mm 25

Inflating fitting to be inserted between the inflator and the valve, universalfor all inflators except: 5001 - 7011 - 6011 - Bravo 12