ProSport HD for lithium batteries boasts a new three-surface heat sink. This lightweight design ensures faster charging, thanks to optimal cooling, while providing a constant current rating in amperes during charging. User-selectable charging profiles for Flooded, AGM, Gel and approved ProMariner LiFePO4 (lithium) batteries. The ProSportHDs enhanced microprocessor and control software feature a dashboard of new digital functions, including: full charge indicator, charge mode LED bar, individual full/full battery indicators and 4 digitally selectable high performance charging profiles.Fully automatic multi-stage charging improves battery performance with 5 sequential stages: Analysis, Charging, Conditioning, Automatic Maintenance (energy saving) and a once-a-month reconditioning mode, safe for short and long term storage.The Distributed-On-Demand system ensures 100% of the available charge amperage is fully utilised to meet the demand of each battery on board.System Check OK and Battery Status indicators provide real-time feedback on installation and battery status.Designed for use in harsh environments, with industrial-grade sheathed DC and AC power cables with moulded strain reliefs and wire splitters.Safety features including double waterproof in-line fuses, reverse polarity, overtemperature and overcurrent, overvoltage and ignition protection.

ProSport HD for lithium batteries boasts a new three-surface heat sink. This lightweight design ensures faster charging, thanks to optimal cooling, while providing a constant current rating in amperes during charging.User-selectable charging profiles for Flooded, AGM, Gel and approved ProMariner LiFePO4 (lithium) batteries.The ProSportHDs enhanced microprocessor and control software feature a dashboard of new digital functions, including: full charge indicator, charge mode LED bar, individual full/full battery indicators and 4 digitally selectable high performance charging profiles.Fully automatic multi-stage charging improves battery performance with 5 sequential stages: Analysis, Charging, Conditioning, Automatic Maintenance (energy saving) and a once-a-month reconditioning mode, safe for short and long term storage.The Distributed-On-Demand system ensures 100% of the available charge amperage is fully utilised to meet the demand of each battery on board.System Check OK and Battery Status indicators provide real-time feedback on installation and battery status.Designed for use in harsh environments, with industrial-grade sheathed DC and AC power cables with moulded strain reliefs and wire splitters.Safety features including double waterproof in-line fuses, reverse polarity, overtemperature and overcurrent, overvoltage and ignition protection. Dimensions mm 200,6x345,5x73,6

ProSport HD for lithium batteries boasts a new three-surface heat sink. This lightweight design ensures faster charging, thanks to optimal cooling, while providing a constant current rating in amperes during charging.User-selectable charging profiles for Flooded, AGM, Gel and approved ProMariner LiFePO4 (lithium) batteries.The ProSportHDs enhanced microprocessor and control software feature a dashboard of new digital functions, including: full charge indicator, charge mode LED bar, individual full/full battery indicators and 4 digitally selectable high performance charging profiles.Fully automatic multi-stage charging improves battery performance with 5 sequential stages: Analysis, Charging, Conditioning, Automatic Maintenance (energy saving) and a once-a-month reconditioning mode, safe for short and long term storage.The Distributed-On-Demand system ensures 100% of the available charge amperage is fully utilised to meet the demand of each battery on board.System Check OK and Battery Status indicators provide real-time feedback on installation and battery status.Designed for use in harsh environments, with industrial-grade sheathed DC and AC power cables with moulded strain reliefs and wire splitters.Safety features including double waterproof in-line fuses, reverse polarity, overtemperature and overcurrent, overvoltage and ignition protection. Dimensions 200,6x287x73,6

ProSport HD for lithium batteries boasts a new three-surface heat sink. This lightweight design ensures faster charging, thanks to optimal cooling, while providing a constant current rating in amperes during charging.User-selectable charging profiles for Flooded, AGM, Gel and approved ProMariner LiFePO4 (lithium) batteries.The ProSportHDs enhanced microprocessor and control software feature a dashboard of new digital functions, including: full charge indicator, charge mode LED bar, individual full/full battery indicators and 4 digitally selectable high performance charging profiles.Fully automatic multi-stage charging improves battery performance with 5 sequential stages: Analysis, Charging, Conditioning, Automatic Maintenance (energy saving) and a once-a-month reconditioning mode, safe for short and long term storage.The Distributed-On-Demand system ensures 100% of the available charge amperage is fully utilised to meet the demand of each battery on board.System Check OK and Battery Status indicators provide real-time feedback on installation and battery status.Designed for use in harsh environments, with industrial-grade sheathed DC and AC power cables with moulded strain reliefs and wire splitters.Safety features including double waterproof in-line fuses, reverse polarity, overtemperature and overcurrent, overvoltage and ignition protection. Dimensioni mm 200,6x345,5x73,6

IUoU three-stage charging characteristic. Multiple outputs to charge multiple groups of batteries (internal mosfet charge separator). Differentiated charge for open or sealed liquid electrolyte batteries, GEL, AGM Otima, Li-Ion. Integrated output fuses inside the charger (for each output). Ability to deliver full power with low AC mains voltage.Low residual ripple on the outlet. Universal AC mains input (264 ÷ 83 Vac, 45 ÷ 66 Hz).Power factor equal to 1. Variable speed of the cooling fan. Compatibility with any type of generator. Operation in a wide range of ambient temperatures -15 ÷+70 ° C. LED user interface indicating status, errors and output current. Automatic and manual reduced power mode (via CAN bus). CAN bus interface for data transfer.Possibility of connecting up to three battery chargers of the same model in parallel through digital control for current sharing. Charge compensation according to the temperature of thebatteries (1 sensor supplied, plus optional sensors). Battery overheating protection (with optional sensors). Short circuit in output, overload, overvoltage protectionsoutput and overheating.

Offer a maximum power much higher than that in scheme to ensure the powerneeded for applications that require starting point. Security Guards against battery, overheating,battery voltage, output short circuit, overload.

SBC Advanced Plus battery charger switching technology interface CAN BUS digital communication,digital charge-sharing system that allows you to put up to 3 parallel SBC ADV PLUS to chargebattery banks up to 2400 Ah. Charge selector for liquid or gel electrolyte batteries. Ability to usethe charger as a power supply without batteries. Variable speed cooling fan. Protection: reversepolarity (fuse through Ins.) overload, output short circuit, overheating, overvoltage output.

SBC Advanced Plus battery charger switching technology interface CAN BUS digital communication,digital charge-sharing system that allows you to put up to 3 parallel SBC ADV PLUS to chargebattery banks up to 2400 Ah. Charge selector for liquid or gel electrolyte batteries. Ability to usethe charger as a power supply without batteries. Variable speed cooling fan. Protection: reversepolarity (fuse through Ins.) overload, output short circuit, overheating, overvoltage output.

SBC Advanced Plus battery charger switching technology interface CAN BUS digital communication,digital charge-sharing system that allows you to put up to 3 parallel SBC ADV PLUS to chargebattery banks up to 2400 Ah. Charge selector for liquid or gel electrolyte batteries. Ability to usethe charger as a power supply without batteries. Variable speed cooling fan. Protection: reversepolarity (fuse through Ins.) overload, output short circuit, overheating, overvoltage output.

IUoU three-stage charging characteristic. Multiple outputs to charge multiple groups of batteries (internal mosfet charge separator). Differentiated charge for open or sealed liquid electrolyte batteries, GEL, AGM Otima, Li-Ion. Integrated output fuses inside the charger (for each output). Ability to deliver full power with low AC mains voltage.Low residual ripple on the outlet. Universal AC mains input (264 ÷ 83 Vac, 45 ÷ 66 Hz).Power factor equal to 1. Variable speed of the cooling fan. Compatibility with any type of generator. Operation in a wide range of ambient temperatures -15 ÷+70 ° C. LED user interface indicating status, errors and output current. Automatic and manual reduced power mode (via CAN bus). CAN bus interface for data transfer.Possibility of connecting up to three battery chargers of the same model in parallel through digital control for current sharing. Charge compensation according to the temperature of thebatteries (1 sensor supplied, plus optional sensors). Battery overheating protection (with optional sensors). Short circuit in output, overload, overvoltage protectionsoutput and overheating.

IUoU three-stage charging characteristic. Multiple outputs to charge multiple groups of batteries (internal mosfet charge separator). Differentiated charge for open or sealed liquid electrolyte batteries, GEL, AGM Otima, Li-Ion. Integrated output fuses inside the charger (for each output). Ability to deliver full power with low AC mains voltage.Low residual ripple on the outlet. Universal AC mains input (264 ÷ 83 Vac, 45 ÷ 66 Hz).Power factor equal to 1. Variable speed of the cooling fan. Compatibility with any type of generator. Operation in a wide range of ambient temperatures -15 ÷+70 ° C. LED user interface indicating status, errors and output current. Automatic and manual reduced power mode (via CAN bus). CAN bus interface for data transfer.Possibility of connecting up to three battery chargers of the same model in parallel through digital control for current sharing. Charge compensation according to the temperature of thebatteries (1 sensor supplied, plus optional sensors). Battery overheating protection (with optional sensors). Short circuit in output, overload, overvoltage protectionsoutput and overheating.

IUoU three-stage charging characteristic. Multiple outputs to charge multiple groups of batteries (internal mosfet charge separator). Differentiated charge for open or sealed liquid electrolyte batteries, GEL, AGM Otima, Li-Ion. Integrated output fuses inside the charger (for each output). Ability to deliver full power with low AC mains voltage.Low residual ripple on the outlet. Universal AC mains input (264 ÷ 83 Vac, 45 ÷ 66 Hz).Power factor equal to 1. Variable speed of the cooling fan. Compatibility with any type of generator. Operation in a wide range of ambient temperatures -15 ÷+70 ° C. LED user interface indicating status, errors and output current. Automatic and manual reduced power mode (via CAN bus). CAN bus interface for data transfer.Possibility of connecting up to three battery chargers of the same model in parallel through digital control for current sharing. Charge compensation according to the temperature of thebatteries (1 sensor supplied, plus optional sensors). Battery overheating protection (with optional sensors). Short circuit in output, overload, overvoltage protectionsoutput and overheating.

Neues NRG HochleistungsladegerätAdditional information:IUoU three-stage charging characteristic. Multiple outputs to charge multiple groups of batteries (internal mosfet charge separator). Differentiated charge for open or sealed liquid electrolyte batteries, GEL, AGM Otima, Li-Ion. Integrated output fuses inside the charger (for each output). Ability to deliver full power with low AC mains voltage.Low residual ripple on the outlet. Universal AC mains input (264 ÷ 83 Vac, 45 ÷ 66 Hz).Power factor equal to 1. Variable speed of the cooling fan. Compatibility with any type of generator. Operation in a wide range of ambient temperatures -15 ÷+70 ° C. LED user interface indicating status, errors and output current. Automatic and manual reduced power mode (via CAN bus). CAN bus interface for data transfer.Possibility of connecting up to three battery chargers of the same model in parallel through digital control for current sharing. Charge compensation according to the temperature of thebatteries (1 sensor supplied, plus optional sensors). Battery overheating protection (with optional sensors). Short circuit in output, overload, overvoltage protectionsoutput and overheating.

NRG Battery Charger SBC switching technology, digital communication interface CAN BUS systemof digital distribution of charge that can put up to 3 parallel SBC NRG (700-1100 and high power).Charge selector for liquid electrolyte batteries open and sealed, GEL or AGM. Multiple outputs inorder to charge more groups of batteries (internal MOSFET charge separator). Possibility to usethe charger as a power supply without batteries. Variable speed fan cooling. Overload protection,output short circuit, overheating, overvoltage output. Fuses output integrated into the charger (foreach output). User interface consists of alphanumeric backlit LCD display and 3 buttons. Reducedpower mode automatically and manually.

IUoU three-stage charging characteristic. Multiple outputs to charge multiple groups of batteries (internal mosfet charge separator). Differentiated charge for open or sealed liquid electrolyte batteries, GEL, AGM, Li-Ion, Otima. Integrated output fuses inside the charger (for each output). Ability to deliver full power with low AC mains voltage. Low residual ripple on the outlet. Universal AC mains input (264 ÷ 83 Vac, 45 ÷ 66 Hz). Power factor equal to 1. Variable speed of the cooling fan. Compatibility with any type of generator. Operation in a wide range of ambient temperatures -15 ÷ +70 ° C. LED user interface indicating status, errors and output current. Automatic and manual reduced power mode (via CAN bus). CAN bus interface for data transfer.Charge compensation according to the battery temperature (1 sensor supplied, plus optional sensors). Battery overheating protection (with optional sensors).Output short circuit, overload, output overvoltage and overheating protections.

IUoU three-stage charge characteristic. Multiple outputs to charge multiple groups of batteries (internal mosfet charge separator). Differentiated charge for open or sealed liquid electrolyte batteries, GEL, AGM, Li-Ion, Otima. Integrated output fuses inside the charger (for each output). Ability to deliver full power with low AC mains voltage. Low residual ripple on the outlet. Universal AC mains input (264 ÷ 83 Vac, 45 ÷ 66 Hz). Power factor equal to 1. Variable speed of the cooling fan. Compatibility with any type of generator. Operation in a wide range of ambient temperatures -15 ÷ +70 ° C. LED user interface indicating status, errors and output current. Automatic and manual reduced power mode (via CAN bus). CAN bus interface for data transfer.Charge compensation according to the battery temperature (1 sensor supplied, plus optional sensors). Battery overheating protection (with optional sensors).Output short circuit, overload, output overvoltage and overheating protections.